368271-B21 - HP ProLiant BL30p Intel® Xeon® Processor 3.20 GHz 1MB 1GB 2P Blade Server

368271-B21

 
 
>> related accessories, supplies and services
 
 
Expansion slots
Expansion slot
No slots
Expansion slots
No slots
Memory
Memory type
2-way interleaved capable PC2100 DDR SDRAM Memory running at 266MHz
Memory type
2-way interleaved when an identical pair installed
Maximum memory
4 GB DDR SDRAM
Maximum memory
4 GB maximum memory
Memory slots
2 slots
Standard memory
1 GB
Standard memory
1024 MB standard memory
Memory slots
2 slots
Memory upgrade
Expandable to 4 GB - Memory must be installed in pairs
Memory upgrade
Expandable to 4 GB - Memory must be installed in pairs
Cache
2-MB Level 3 writeback per processor; 1-MB Level 3 writeback per processor; 512-KB Level 2 writeback per processor
Internal cache
1-MB Level 3 writeback per processor
Networking
Network interface
2 10/100/1000T NICs + 1 Dedicated iLO Port
Network interface
Two (2) NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE; One (1) 10/100T NIC (embedded) dedicated to iLO management
Ports
I/O port
2 USB ports, 1 video port, 1 iLO port and 1 serial port
Power
Power availability
3000 watts
Power features
BL p-Class power enclosure provides shared, external, redundant power
Power requirements
-43 VDC to -53 VDC, Nominal -48 VDC; 125 A at -48 VDC
Power supply type
Rack-centralized External hot-plug power
Processor
Chipset
ServerWorks GC-LE chipset
Processor
Intel® Xeon® DP 3.06 GHz or 3.20 GHz Processor
Processor type
Intel® Xeon® Processor 3.20 GHz
Processor speed
3.20 GHz
Multiple processor
Up to 2 processors
Number of processors
2 processors
Number of processors
1 or 2 supported
Processor upgrade
Up to 2 processors
Rack
Rack mounting
Minimum Rack Requirements: Mounts in ProLiant, and Telco racks and Third Party racks that meet the following criteria: - Compatible with 19-inch Standard EIA rail sets - EIA rail-to-rail depth is 29 - 30" - Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to rear door, inclusive in the 36-inch overall depth) - Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch panel) - Must be capable of supporting 1600 lb (for full rack configuration) - Perforated front and rear doors to accommodate front-to-back cooling - Must have 65% open perforation on server blade enclosure doors to support airflow requirements - Optimized for use with the HP 10000 Series racks Rack Airflow Requirements: - HP 10000 series racks provide enhanced airflow for maximum cooling, allowing racks to be fully loaded with servers and server blades using the latest server technologies. - Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). - Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).
Software
Compatible operating systems
Microsoft® Windows®; LINUX®
Compatible operating systems
Microsoft® Windows®; LINUX®
Storage
Optical drives
Virtual CD-ROM
Flexible disk drive
None
Flexible disk drive
Virtual Floppy
Hard disk drive
None ship standard
Internal hard disk drive
No hard disk drive in standard configuration
Hard disk drive speed
Not applicable
Hard disk speed
Not applicable
Optical drive type
None
Disk subsystem controller
Integrated with ServerWorks chipset
Internal drive bays
2 2.5" ATA non-hot plug drive bays
Internal mass storage
Up to 120-GB maximum (with optional hard drives)
System
Chassis
1U X 3U form factor
Chassis type
1U X 3U form factor - plugs vertically into 6U server enclosure via blade sleeve
Security management
Power-on password Administrator's password Integrated Lights-Out has 12 customizable user accounts and SSL encryption Integrated Lights-Out can be disabled via a Global Setting Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP secure copy protocol*, port-based IEEE 802.1Q tagged VLANs, RADIUS user authentication and authorization*, and IP address restriction NOTE*: GbE2 Interconnect Switch only
Features 01
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 02
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 03
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 04
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 05
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 06
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 07
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 08
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 09
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
Features 10
Up to two Intel Xeon® 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology. ServerWorks GC-LE chipset.
1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
Server management: Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature
Two (2) NC7781 PCI-X Gigabit NICs (embedded); One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor EIDE 60-GB hard drives
RAID-Aware BIOS for Linux enables both primary and secondary hard drives to be bootable
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
BL30p plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure; Local I/O cable attaches to front of blade and provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
Up to 96 BL30p blades fit in 42U rack in non-redundant power configuration; up to 80 BL30p blades fit in 42U in full power redundant configuration
 
 
Non-operating humidity5% to 95% (non condensing)
Operating temperature range10° to 35° C
Non-operating humidity5% to 95% (non condensing)
Operating temperature range10° to 35° C
 
 
Dimensions, metric44.70 x 73.30 x 26.67 cm
Weight, metric16.8 kg
Weight16.8 kg
Dimensions (W x D x H)44.70 x 73.30 x 26.67 cm
 
legal disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.

 
trademark

Microsoft and Windows NT are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Novell and NetWare are registered trademarks or trademarks of Novell, Inc. Solaris is a registered trademark or trademark of Sun Microsystems, Inc., in the U.S. and/or other countries. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat, Inc., in the U.S. and/or other countries. SuSE and its logo are registered trademarks or trademarks of SuSE AG in the U.S. and/or other countries. UNIX is a registered trademark of The Open Group in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.

 

© 2002 Hewlett-Packard Company