382608-B21 - HP ProLiant DL385 Configure to order Chassis

382608-B21

 
 
Related products
 
  • SCSI Models - Up to two AMD Opteron™ processors model 285 (2.6 GHz dual-core), model 280 (2.4 GHz dual-core), 275 (2.2 GHz dual-core), 270 (2.0 GHz dual-core), 265 (1.8 GHz dual-core), 254 (2.8 GHz single-core), 252 (2.6 GHz single-core) and 250 (2.4 GHz single-core) with 1 MB L2 cache per core; SAS Models - Up to two AMD Opteron™ processors model 285 (2.6 GHz dual-core), model 280 (2.4 GHz dual-core), 275 (2.2 GHz dual-core) and 265 (1.8 GHz dual-core) with 1 MB L2 cache per core; Up to 16 GB of 2-way interleaved PC3200 DDR SDRAM or 32 GB PC2700 DDR SDRAM to support demanding memory intensive applications; 3 full-length PCI-X expansion slots; Dual embedded Gigabit NICs for fast network communications; SCSI Model - Smart Array 6i controller with Battery-Backed Write Cache enabler; SAS Model - Smart Array P600 controller
  • Integrated Lights-Out (iLO) allows powerful, hardware-based remote administration and control from a standard web-browser to conserve valuable IT staff resources; Server configuration and deployment is simplified with tools like SmartStart, Rapid Deployment Pack, PXE, and ROM-Based Setup Utility (RBSU); Management tools such as HP Systems Insight Manager and iLO provide easy yet secure status and access to HP ProLiant servers, ensuring optimal levels of uptime
  • Clean, tool-free, mechanical design enhances reliability and simplifies configuration and maintenance : Tool-free, modular components, Hot-plug redundancy features for fast maintenance, Minimal cables for easy access to components; Quick deploy rail system delivers easy installation and fast server access : Universal tool-free sliding rails support square and round hole racks, New Ambidextrous cable management arm for cabling flexibility, Quick Release levers provide fast access; Commonality focus, within and across platforms, increases IT productivity : Universal drives and Smart Array Controllers, Common components simplify spares (Hot-plug fans shared with DL380 G3 and DL380 G4, Unit ID for easy in rack identification); ROM based configuration and management features increase uptime and simplify configuration (Redundant ROM protects platform during upgrades, ROM based drivers for OS independent health monitoring)
 
 
Expansion slots
Expansion slot
2x 64-bit/100MHz PCI-X, 3.3 Volt; 1x 64-bit/133MHz PCI-X, 3.3 Volt
Expansion slots
2x 64-bit/100MHz PCI-X, 3.3 Volt; 1x 64-bit/133MHz PCI-X, 3.3 Volt
Memory
Memory type
PC3200 400MHz DDR Standard Memory
Memory type
PC3200 400MHz DDR Standard Memory
Maximum memory
16 GB (at 400 MHz); 32 GB (at 333 MHz)
Memory slots
8 DIMM slots (slots 5 – 8 are available when second processor is added)
Standard memory
1024 MB (2 x 512 MB)
Memory slots
8 DIMM slots (slots 5 – 8 are available when second processor is added)
Memory upgrade
16 GB (at 400 MHz) or 32 GB (at 333 MHz) maximum
Memory upgrade
16 GB (at 400 MHz) or 32 GB (at 333 MHz) maximum memory
Cache
1 MB Integrated Level 2 Cache per core or 1 MB Integrated Level 2 Cache
Networking
Network interface
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Network interface
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Ports
I/O port
Serial - 1; Pointing Device (Mouse) - 1; Graphics - 1; Keyboard - 1; Network RJ-45 - 3 (1 for iLO); USB - 3 (1 front, 2 back)
External I/O ports
Serial - 1; Pointing Device (Mouse) - 1; Graphics - 1; Keyboard - 1; Network RJ-45 - 3 (1 for iLO); USB - 3 (1 front, 2 back)
Power
Power availability
575 Watt
Power features
575 Watt, CE Mark CompliantOptional Hot Plug AC; Redundant Power Supply
Power requirements
100-132 VAC, 200-240 VAC, 50 to 60 Hz
Processor
Chipset
AMD Opteron™ 8000 series Chipset
Chipset
AMD Opteron™ 8000 series Chipset
Multiple processor
Upgradeable to dual processing
Number of processors
1 or 2 supported
Processor upgrade
Upgradeable to dual processing
Rack
Rack mounting
The DL385 quick deploy rail system provides tool-free support for racks with square or round mounting holes with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
Rack mounting
The DL385 quick deploy rail system provides tool-free support for racks with square or round mounting holes with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
Software
Service & support
3 year parts, 3 year labour, 3 year next business day on-site support
Compatible operating systems
Microsoft® Windows® Server 2000; Microsoft® Windows® Server 2003; Novell NetWare; LINUX (Red Hat, SuSE); VMware Virtualization Software, Solaris 10 32/64-bit
Compatible operating systems
Microsoft® Windows® Server 2000; Microsoft® Windows® Server 2003; Novell NetWare; LINUX (Red Hat, SuSE); VMware Virtualization Software, Solaris 10 32/64-bit
Storage
Optical drives
24x IDE CD-ROM
Optical drives
24x IDE CD-ROM
Flexible disk drive
1.44 MB Diskette Drive (optional)
Flexible disk drive
1.44 MB Diskette Drive (optional on some models)
Hard disk drive
No hard disk drive in standard configuration
Internal hard disk drive
No hard disk drive in standard configuration
Hard disk drive speed
Not Applicable
Hard disk speed
Not Applicable
Optical drive type
CD-ROM
Disk subsystem controller
Smart Array 6i Controller (integrated on system board); Smart Array P600 controller in PCI slot with 256 MB Battery-Backed Write Cache
Internal drive bays
Support for up to six (6) 1" Ultra320 SCSI Hot Plug Hard Drives or for five (5)Hot Plug Hard Drives and one (1) DAT 40 or DAT 72 Hot Plug tape drive; or SAS Model : Support up to eight (8) Small Form Factor (SFF) SAS drive (Internal tape is not supported on SAS models)
Internal mass storage
576 GB or 1.80 TB Internal Hot Plug capacity
System
Chassis
2U Rack
Chassis type
2U Rack
Manageability features
HP Systems Insight Manager SmartStart; Redundant ROM; Remote Flash ROM; Management Agent; Integrated Management Log; Automatic Server Recovery (ASR); Dynamic Sector Repairing (with Smart Array Controllers); Drive Parameter Tracking (with Smart Array Controllers); Hot Spare Boot(NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).); Pre-Failure Warranty (covers processors, hard drives and memory)
Manageability features
HP Systems Insight Manager SmartStart; Redundant ROM; Remote Flash ROM; Management Agent; Integrated Management Log; Automatic Server Recovery (ASR); Dynamic Sector Repairing (with Smart Array Controllers); Drive Parameter Tracking (with Smart Array Controllers); Hot Spare Boot(NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).); Pre-Failure Warranty (covers processors, hard drives and memory)
Features 01
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 02
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 03
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 04
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 05
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 06
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 07
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 08
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 09
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Features 10
Support for model 285 (2.6 GHz), which is a dual-core processor and is supported on both SCSI and SAS models
1 GB PC3200 400MHz DDR Memory (2 x 512 MB)
AMD Opteron™ 8000 series Chipset
Hot Plug Fans with optional full redundancy
Hot Plug Power Supply with optional redundancy
Tool-less access to all system components for easy in rack serviceability
Three available 64 bit PCI-X slots, including two Non Hot Plug 100 MHz slots and one Non Hot Plug 133 MHz slot
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Optional dual channel drive backplane (2/4 split)
Optional floppy disk drive
Video
Video adapter
Integrated ATI Rage XL Video Controller
Video RAM
8 MB SDRAM Video Memory
Graphic card 01
Integrated ATI Rage XL Video Controller
 
 
Operating humidity range10 to 90% non-condensing
Operating temperature range10° to 35° C
Acoustic pressure emissions58 dB(A)
Acoustic power emissions7.4 B(A)
Acoustic pressure emissions58 dB(A)
Operating temperature range10° to 35° C
 
 
UNSPC code43211501
Compliance industry standardsACPI 2.0 Compliant; PCI 2.2 Compliant; WOL Support; Microsoft® Logo certifications; USB 1.1 Support
Compliance industry standardsACPI 2.0 Compliant; PCI 2.2 Compliant; WOL Support; Microsoft® Logo certifications; USB 1.1 Support
 
 
Weight20.41 kg
Dimensions (W x D x H)44.54 x 66.07 x 8.59 cm
Dimensions, metric44.54 x 66.07 x 8.59 cm
 
Legal Disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.

 
Trademark

Microsoft and Windows NT are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Novell and NetWare are registered trademarks or trademarks of Novell, Inc. Solaris is a registered trademark or trademark of Sun Microsystems, Inc., in the U.S. and/or other countries. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat, Inc., in the U.S. and/or other countries. SuSE and its logo are registered trademarks or trademarks of SuSE AG in the U.S. and/or other countries. UNIX is a registered trademark of The Open Group in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.

 

© 2002 Hewlett-Packard Company