AK377A - HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader

AK377A

 
 
Related products
 
Configuration
Host interface
3 Gb/sec SAS
Connectivity
I/O module connector
(1) Mini-SAS (located on back of 1/8 G2 SAS model); (1) RJ-45 (located on back of 1/8 G2); (1) USB port (diagnostic only; located on back of 1/8 G2)
Software
Software included
The 1/8 G2 Tape Autoloader includes HP StorageWorks Data Protector Express, Single Server Edition for Windows/Linux/NetWare. This application allows you to securely back up, and if necessary recover, a single Windows/Linux/NetWare machine to/from your HP StorageWorks tape drive or tape autoloader.
Storage
Storage capacity
12.8 TB Compressed 2:1; 6.4 TB Native
Burst transfer rate performance
Native: 80 MB/s; compressed: 160 MB/s
Native capacity
6.4 TB
Storage drive
LTO-4 Ultrium 1760; (1) Included
Drive type
Ultrium 1760
Data transfer rate
576 GB/hr; Compressed 2:1
Mean time between failures
100,000 hours (based on 1M MSBF)
Encryption type
AES 256-bit
Cartridge slots included
8
System
Form factor
1U
 
Legal Disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.