AL585A - HP ProLiant BL460c Special Blade Server

AL585A

 
 
Related products
 
  • Intel Xeon 5400, 5300 and 5100 sequence processors increase system performance; Increased cache; Faster system bus; VT Technology; Up to 32GB of memory capacity helping to eliminate a common system bottleneck; Well-balanced architecture bringing more performance per Watt for web hosting, infrastructure, clustering and compute node environment
  • Embedded technologies and two mezzanine slots offer deployment versatility in an efficient dense form factor; Optional high speed graphical remote console and virtual media functionality further enhances the feature set; High performance Smart Array and multi-function Gigabit NICs maximize I/O performance; Two I/O slots and 2 SAS or SATA drive bays allows for a versatile configuration and deployment option.
  • Conserve valuable IT resources and time by centralizing and simplifying management functions with Integrated Lights-Out 2 (iLO 2) Standard Blade Edition and Insight Control Data Center Edition; Integrated Lights-Out 2 (iLO 2) Standard Blade Edition delivers the industry's most complete, high-performance, out-of-band remote management solution; Virtual KVM performance, iLO 2 Standard Blade Edition now provides all of the capabilities required for administrative or maintenance tasks from a single remote console; iLO 2 Standard Blade Edition provides true in-front-of-the-server control of systems located in datacenters or remote locations from the office, home or travel location; All of the above eliminates unnecessary travel, increases IT efficiency and responsiveness, as well as one single remote management and control solution.
 
 
Expansion slots
Expansion slot
Two Mezzanine slots (One x8 and one x4)
Expansion slots
Two Mezzanine slots (One x8 and one x4)
Memory
Memory type
PC2-5300 Fully Buffered DIMMs at 667 MHz
Memory type
PC2-5300 Fully Buffered DIMMs at 667 MHz
Maximum memory
64 GB
Memory slots
8 DIMM slots
Standard memory
1 GB (2 x 512 MB) or 2 GB (2 x 1 GB) Standard Memory
Memory slots
8 DIMM slots
Memory upgrade
32 GB (8 x 4 GB)
Memory upgrade
32 GB (8 x 4 GB)
Cache
2 x 6 MB shared L2 cache (5400 Sequence); 1 x 6 MB L2 cache (5200 Sequence); 2 x 4 MB Level 2 cache memory (5300 Sequence; 1 x 4 MB Level 2 cache memory (5100 Sequence)
Internal cache
12 MB (2 x 6 MB) Level 2 cache memory
Networking
Network interface
Two (2) embedded single port NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine including support for Accelerated iSCSI and RDMA through optional ProLiant Essentials Licensing Kits; One (1) additional 10/100 NIC dedicated to iLO 2 Management
Network interface
Two (2) embedded single port NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine including support for Accelerated iSCSI and RDMA through optional ProLiant Essentials Licensing Kits; One (1) additional 10/100 NIC dedicated to iLO 2 Management
Processor
Chipset
Intel® 5000P Chipset
Chipset
Intel® 5000P Chipset
Processor speed
2.50 GHz
Multiple processor
Upgradeable to 2 processors
Number of processors
1 processor
Processor upgrade
Upgradeable to 2 processors
Software
Compatible operating systems
Microsoft® Windows® 2000 Server; Microsoft® Windows® 2000 Advanced Server; Microsoft® Windows® Server 2003, Standard Edition; Microsoft® Windows® Server 2003 R2, Standard Edition; Microsoft® Windows® Server 2003, Standard x64 Edition; Microsoft® Windows® Server 2003 R2, Standard x64 Edition; Microsoft® Windows® Server 2003, Web Edition; Microsoft® Windows® Server 2003 R2, Web Edition; Microsoft® Windows® Server 2003, Enterprise Edition; Microsoft® Windows® 2003 R2, Enterprise Edition; Microsoft® Windows® Server 2003, Enterprise x64 Edition; Microsoft® Windows® Server 2003 R2, Enterprise x64 Edition; Microsoft® Windows® Small Business Server 2003, R2; Microsoft® Windows® 2008; Red Hat Enterprise Linux; Solaris 10 (32 and 64-bit); SUSE Linux Enterprise Server; Netware 6.5; VMware ESX Server 3.0.2; Integrated VMware ESX Server 3i; Integrated Citrix XenServer
Compatible operating systems
Microsoft® Windows® 2000 Server; Microsoft® Windows® 2000 Advanced Server; Microsoft® Windows® Server 2003, Standard Edition; Microsoft® Windows® Server 2003 R2, Standard Edition; Microsoft® Windows® Server 2003, Standard x64 Edition; Microsoft® Windows® Server 2003 R2, Standard x64 Edition; Microsoft® Windows® Server 2003, Web Edition; Microsoft® Windows® Server 2003 R2, Web Edition; Microsoft® Windows® Server 2003, Enterprise Edition; Microsoft® Windows® Server 2003 R2, Enterprise Edition; Microsoft® Windows® Server 2003, Enterprise x64 Edition; Microsoft® Windows® Server 2003 R2, Enterprise x64 Edition; Red Hat Enterprise Linux; Solaris 10 (32 and 64-bit); SUSE Linux Enterprise Server; Netware 6.5
Storage
Optical drives
None
Optical drives
None
Hard disk drive
No hard disk drive in standard configuration; (2) SFF SAS/SATA drive bays
Internal hard disk drive
No hard disk drive in standard configuration
Hard disk drive speed
Not applicable
Hard disk speed
Not applicable
Optical drive type
None
Disk subsystem controller
HP Smart Array E200i Controller with 64MB (optional battery-backed write cache) Available upgrades: 128MB with Battery-backed write cache
Internal drive bays
2 Serial Attached Small Form Factor SAS hot-plug or SATA bays
Internal drive bays
2 Serial Attached Small Form Factor SAS hot-plug or SATA bays
Hard disk controller
Smart Array E200 Controller with 128MB (RAID 0/1) with Battery Backed Write Cache (BBWC)
Internal mass storage
Hot Plug Serial Attach SCSI (SAS): 292 GB SAS (2 x 146 GB Serial SCSI); Hot Plug Serial ATA (SATA): 240 GB SATA (2 x 120 GB Serial ATA)
Internal mass storage
Hot Plug Serial Attach SCSI (SAS): 292 GB SAS (2 x 146 GB Serial SCSI); Hot Plug Serial ATA (SATA): 240 GB SATA (2 x 120 GB Serial ATA)
System
Chassis
HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Chassis type
Up to 8 half-height blades supported in HP BladeSystem c3000 Enclosure; Up to 16 half-height blades supported in HP BladeSystem c7000 Enclosure
Manageability features
Integrated Lights-Out 2 Standard Blade Edition (iLO 2); Virtual KVM based remote console; Virtual media (single server, browser based access only); Remote Serial Console; Virtual Power Button Control; Virtual Unit ID control; Integrated Remote Console; Dedicated network connectivity; Embedded system health; Browser, command line and scripted access; Automatic IP Configuration via DHCP/DNS/WINS; Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH); OS independent hardware health status; IML and iLO Event Logging; Support for 12 user accounts with customizable access privilege; Single sign-on from HP BladeSystem Onboard Administrator
Manageability features
Integrated Lights-Out 2 Standard Blade Edition (iLO 2); Virtual KVM based remote console; Virtual media (single server, browser based access only); Remote Serial Console; Virtual Power Button Control; Virtual Unit ID control; Integrated Remote Console; Dedicated network connectivity; Embedded system health; Browser, command line and scripted access; Automatic IP Configuration via DHCP/DNS/WINS; Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH); OS independent hardware health status; IML and iLO Event Logging; Support for 12 user accounts with customizable access privilege; Single sign-on from HP BladeSystem Onboard Administrator
Security management
One (1) internal USB 2.0 connector for security key devices and USB drive keys; Power-on password; Administrator's password; Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption; Integrated Lights-Out 2 can be disabled via a Global Setting
Security management
One (1) internal USB 2.0 connector for security key devices and USB drive keys; Power-on password; Administrator's password; Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption; Integrated Lights-Out 2 can be disabled via a Global Setting
System bus
1333 MHz Front Side Bus
System bus
1333/1066 MHz Front Side Bus
Features 01
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 02
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 03
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 04
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 05
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 06
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 07
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 08
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 09
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Features 10
Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors; Up to two Quad-Core Intel® Xeon® 5300 sequence processors; Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors; Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory; Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory: Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W processors; Supporting low-power memory; Advanced ECC memory support; Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller: Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models
Internal Drive Support: Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
Network Controller: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows; One (1) additional 10/100 NIC dedicated to iLO 2 Management.
Mezzanine Support: Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards; Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic); Ethernet NIC Mezzanine options for additional network ports; HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem; HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem; HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
Internal USB Support: One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models; VMware ESX Server 3i and Citrix XenServer virtualization technology: Integrated Hypervisors: VMware ESX Server 3i virtualization technology; Citrix XenServer virtualization technology
Form Factor: HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management: Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost)
Operating Systems: Supports Windows, Linux, Netware, and Solaris Operating Systems
Video
Video adapter
Integrated ATI RN-50
Video RAM
32 MB DDR1 video memory
Graphic card 01
Integrated ATI RN-50
Video resolutions description
1600 x1280 x 64 K 16 M color
 
 
Operating humidity range10 to 90% RH
Operating temperature range10° to 35° C
Non-operating altitude9,144 m
Operating temperature range10° to 35° C
 
 
UNSPC code43211501
Compliance industry standardsACPI 2.0 Compliant; PCI 2.2 Compliant; WOL Support; Microsoft® Logo certifications; USB 2.0 Support
Compliance industry standardsACPI 2.0 Compliant; PCI 2.2 Compliant; WOL Support; Microsoft® Logo certifications; USB 2.0 Support
 
 
Weight6.44 kg
Dimensions (W x D x H)5.56 x 50.95 x 18.17 cm
Dimensions, metric5.56 x 50.95 x 18.17 cm
 
Legal Disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.

 
Trademark

Microsoft and Windows NT are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Novell and NetWare are registered trademarks or trademarks of Novell, Inc. Solaris is a registered trademark or trademark of Sun Microsystems, Inc., in the U.S. and/or other countries. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat, Inc., in the U.S. and/or other countries. SuSE and its logo are registered trademarks or trademarks of SuSE AG in the U.S. and/or other countries. UNIX is a registered trademark of The Open Group in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.

 

© 2002 Hewlett-Packard Company