330731-B25 - HP MSL6030 2 Ultrium 460 Drive FCRouter Rack-mount


>>related products

Multi-unit stacking allows the library to grow with your storage requirements. You can start with a direct-attach configuration, and easily change to network storage environment with only an interface card upgrade.

Available with a broad choice in tape technology, including: Ultrium 960, Ultrium 460, and SDLT 600, and with either a SCSI or Fibre Channel interface. Upgrade to new technology with easy to install upgrade kits.

User-friendly GUI control panel and web interface make library management easy from any remote or local location.

Tape libraries provide consistent backup and automatically change tapes with robotics rating of 2 million MSBF (spell out).

5U and I0U modules offer the highest storage density in their class.

Buy only the storage you need now and add more later.

Drives can be upgraded as technology progresses.

All MSL6000 libraries work with industry leading servers, operating systems, and backup software is fully tested through the HP StorageWorks Enterprise Backup Solutions group for complete certification.

Investment protection by providing instant interface and drive technology upgrades without hassle.

Mount Type
External Connectors
VHDCI interconnect
Indicator Types
Touch screen, LEDs
Activity Indicators
Menu (View System Data, Utilities, Edit Options) - View System Data (Library Options, SCSI Options, Network Options, Library Info, Cartridge Map) - Utilities (Maintenance, Diagnostics, Factory, Security Level) - Edit Options (Library, SCSI, Network, Passwords)
Online (Offline/Online Status LED)
Utilities (Maintenance, Diagnostics, Factory, Security Level)
Edit Options (Library, SCSI, Network, Passwords)
Online (Offline/Online Status LED)
Status (Library and Drive Status)
Power (Auto-power-on selection)
Mail Slot Access
Magazine Access
HP Contact Info (HP Logo)
Location Indicators
Front panel
Front panel
Sustained Transfer Rate, Compressed
60.0 MB/sec
Sustained Transfer Rate, Note
per LTO Ultrium 960 drive
Sustained Transfer Rate, Native
30.0 MB/sec
Input-output Port
Embedded Fibre (1Gb or 2Gb - user selectable)
Power Supply Heat Dissipation (imperial)
612.0 Btu/hr
Utility Voltage Tolerance, Unit of Measure
Power Supply Total Power, Maximum
200.0 W
Power Supply Total Power, Typical
180.0 W
Base Unit Capacity Range, Maximum
48 TB
Compressed Capacity Range, Maximum
48.0 TB
Compressed Cartridge Capacity Note
base unit, with Ultrium 960 drive
Configuration, Maximum Compressed Capacity Including Expansion Enclosures
192 TB
Configuration, Maximum Native Capacity Including Expansion Enclosures
96 TB
Native Capacity Range, Maximum
24.0 TB
Native Cartridge Capacity Note
base unit, with Ultrium 960 drive
Number of Installed Drives
SCSI Interface
Ultra3 LVD SCSI, VHDCI interconnect
Maximum Number of Cartridge Slots
Mean Swaps Between Failures
2000000.0 load-unload cycles
Mean Time Between Failure
250000.0 hrs @100% duty cycle
Compression Ratio, Maximum
Compression Ratio, Typical
Maximum Drives Per Unit
Maximum Number of Drives
Base Unit, Number of Drives
Maximum Temperature Range, Non-operating (imperial)140.0 ° F
Relative Non-condensing Humidity, Maximum80.0 %
Maximum Acoustic Power Emissions (ISO 9296), Operating8.0 B(A)
Safety Requirement and ApprovalsSafety: IEC 60950, EMC CISPR 22/class A, CISPR 24, FCC NOTE: For country specific compliance, contact your local sales representative Regulatory Model Number: ED1005 (MSL6030)
Maximum Loaded Weight with Packaging (imperial)61.0 lb
legal disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.