C9572CB - HP StorageWorks Autoloader 1/8 Ultrium

C9572CB

what's in the box

-(1) One Ultrium 230, drive, eight slot tape autoloader -(1) 1.9 meter 68-pin HDTS to 68-pin VHDCI cable -(1) 68-pin LVD SCSI terminator -Documentation kit including manual (CD) and quick start poster -HP OpenView Storage Data Protector flier (for use in downloading Single Server Edition for Windows 2000/NT/2003/XP)

 

summary

Designed for basic data protection, the HP StorageWorks 1/8 Tape Autoloader provides cost-effective, easy-to-install unattended backup. In a rack or on a desktop, it provides up to 3.2 TB of native capacity in a compact 2U form factor.

 
>>related products
 
key features

Automates the backup process at a price comparable to standalone drives

Stores up to 3.2 TB (native) of data with Ultrium 960 technology

Provides consistent backup and automatically changes tapes

Occupies a minimum amount of rack space (2U)

Allows IT resources performing manual backups to work on other critical tasks

Holds eight cartridges and one drive in 2U of space

Provides an easy transition from standalone tape into automated tape backup

Works with leading servers, operating systems and backup software

SDLT 320 version is backward read compatible with media written on by DLT 4000, DLT 7000, DLT 8000, DLT1 and DLT VS80 drives; backward read/write compatible with media written on by SDLT 220 drives

Supports Ultrium 960, Ultrium 448, SDLT 320, Ultrium 232 and DLT VS80 drive technologies

 
specifications
Configuration
Mount Type
External/Tabletop
Connectivity
External Connectors
(2) 68-pin HD (on rear of 1/8 autoloader)
Displays
Indicator Types
LED
Activity Indicators
Left (Green) LED shows ready status information Right (Amber) LED shows fault status information
Center (Amber) Illuminated if the tape drive requires cleaning or the tape media requires attention
Right (Red) Illuminated when error occurs; corresponding message will be shown on LCD screen
Location Indicators
Front Panel
Front Panel
Front Panel
Performance
Sustained Transfer Rate, Compressed
30.0 MB/sec
Sustained Transfer Rate, Native
15.0 MB/sec
Power
Power Supply Total Power, Maximum
56.0 W
Storage
Compressed Capacity Range, Maximum
1.6 TB
Compressed Capacity Range, Minimum
0.0 TB
Compressed Cartridge Capacity Note
Ultrium 230 drive
Native Capacity Range, Maximum
800.0 GB
Native Capacity Range, Minimum
0.0 GB
Native Cartridge Capacity Note
Ultrium 230 drive
Number of Installed Drives
1
SCSI Interface
Ultra2 SCSI LVD/SE
SCSI Interface, Note
Ultrium 960 drive: SCSI Ultra3 (68-pin HD) Ultrium 448 drive: SCSI Ultra3 (68-pin HD) SDLT 320 drive: SCSI Ultra2 (68-pin HD) Ultrium 230 drive: SCSI Ultra2 (68-pin HD) DLT VS80 drive: SCSI Ultra2 (68-pin HD)
Maximum Number of Cartridge Slots
8
Mean Swaps Between Failures
250000.0 swaps
Compression Ratio, Maximum
2:1
Compression Ratio, Typical
2:1
Maximum Drives Per Unit
1
Maximum Number of Drives
1
System
Form Factor
2U
 
 
environmental information
Maximum Temperature Range, Non-operating (imperial)149.0 ° F
Relative Non-condensing Humidity, Maximum80.0 % non-condensing
 
 
physical information
Maximum Loaded Weight with Packaging (imperial)22.0 lb
 
legal disclaimer

The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.